Precautions for transportation of liquid goods
Time:2019-12-10 17:05:57 Reading:2697
▲ Air Freight
Basically no liquid.
▲ Shipping
Bulk liquids are usually transported in tanks or liquid bags, and packed in barrels. Dangerous goods liquids need to provide dangerous pack certificates and product technical specifications (MSDS).
▲ land transport
1. Before transportation:
1. Check the item name, quantity, specifications and other detailed information according to the consignment note.
2. As far as possible, do not mix all kinds of dangerous goods. The mixed goods must meet the requirements in the loading table of the "Dangerous Goods Car Transport Rules."
3. The goods in the truck must be neatly stacked, tied tightly and evenly stacked.
During transportation:
1. Obey laws and regulations such as traffic rules, avoid vehicles, and drive as smoothly as possible. Control the speed, drive without fatigue, drive at medium speed and avoid sudden braking to keep the cargo stable.
2. The exhaust pipe of liquid dangerous goods transport vehicles shall be installed with heat insulation and fire extinguishing star devices, and the exhaust pipe shall be installed with heat insulation and fire extinguishing star devices
3. During transportation, the gap between the barrel and the barrel should be filled with a soft substance such as a gap to cushion it.
4. Canned vehicles should not be loaded too slowly, leaving 5% expansion space. When filled with toxic liquid, stand on the upwind to prevent poisoning by inhalation.
5. Vehicles transporting any chemical products should be covered with rainproof cloth, the main purpose is to prevent cigarette butts.
After transportation:
1. Oily dangerous liquids must be collected using a picking list.
2. After transportation, the compressed gas cylinder must be placed in the designated position and fixed to prevent it from falling down.
3. Use dangerous liquids such as oxygen and liquefied gas in compressed gas cylinders, and there should be no flammable substances such as grease around the valve.
4. When installing the decompression gauge, check the valve and air outlet for flammable impurities such as grease.